Fire door frames for Speke buildings
For property owners, landlords and managing agents in Speke, we offer fire door frames with one team for the survey, the product and the installation.
Buildings in and around Speke range from small blocks of flats to small offices and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Speke survey. Frame-to-wall gaps on Speke jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Frame-to-wall gap sealing with evidenced materials
- Photographs of fixing and sealing before covering
- Assessment of frame condition and compatibility
- Fixing at specified centres with packing
Rules and responsibilities in Speke
Fire doors in Speke fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Speke above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Speke need fire door frames?
You are most likely to need fire door frames if you look after offices, older blocks of flats or converted houses. Whatever the building in Speke, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Speke
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Speke and neighbouring towns
Nearby towns we cover include Halewood, Garston and Runcorn. Distance from Speke does not change our guide prices, and the survey and quote are free.
Questions from Speke
Is Speke within your coverage area?
It is. We cover Speke in Merseyside and neighbouring towns such as Halewood. There is no charge for the survey.
What happens on a survey in Speke?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.