Fire door frames in Liverpool: what's involved
When you book fire door frames in Liverpool, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Liverpool, fire door work covers everything from schools to hotels. We plan each job around the people who use the building.
We photograph every frame we fix in Liverpool before the architraves go on, so the hidden work is on record. Frame-to-wall gaps on Liverpool jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
What you get:
- Assessment of frame condition and compatibility
- Architraves and making good
- Hardwood or certified frames to suit the door
- Frame-to-wall gap sealing with evidenced materials
What the rules say for Liverpool
England's framework applies in Liverpool. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Liverpool, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where fire door frames fit in Liverpool
Typical settings for fire door frames include offices, schools and older blocks of flats. In Liverpool, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Liverpool installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Liverpool
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Liverpool building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Liverpool and neighbouring towns
Beyond Liverpool itself we also cover nearby towns such as Birkenhead (3.1 km), Wallasey and Litherland. The service, pricing and evidence are the same wherever you are.
Questions
Is Liverpool within your coverage area?
It is. We cover Liverpool in Merseyside and neighbouring towns such as Birkenhead. There is no charge for the survey.
What happens on a survey in Liverpool?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.