Getting fire door frames right in Ellesmere Port
Looking for fire door frames in Ellesmere Port? We supply and fit certified fire doors and components across Ellesmere Port and the wider Cheshire area, working from a free survey and a fixed written quote.
Fire doors in Ellesmere Port protect escape routes in houses with integral garages, low-rise blocks of flats and high-street shops alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Frame-to-wall gaps on Ellesmere Port jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Ellesmere Port survey.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
As standard, the work covers:
- Architraves and making good
- Fixing at specified centres with packing
- Frame-to-wall gap sealing with evidenced materials
- Hardwood or certified frames to suit the door
Rules and responsibilities in Ellesmere Port
England's framework applies in Ellesmere Port. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Ellesmere Port, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where fire door frames fit in Ellesmere Port
From older blocks of flats to offices, the requirement for fire door frames in Ellesmere Port comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Ellesmere Port
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Ellesmere Port?
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Ellesmere Port
Ellesmere Port is about 24.8 km from Warrington, and we cover both, along with nearby Garston and Speke. Send us your postcode and we'll confirm survey dates.
Questions from Ellesmere Port
Is Ellesmere Port within your coverage area?
It is. We cover Ellesmere Port in Cheshire and neighbouring towns such as Garston. There is no charge for the survey.
How quickly can you survey in Ellesmere Port?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.