What fire door closers in Tonbridge should include
Looking for fire door closers in Tonbridge? We supply and fit certified fire doors and components across Tonbridge and the wider Kent area, working from a free survey and a fixed written quote.
Around Tonbridge, small blocks of flats, care homes and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Free-swing closers are a practical option for Tonbridge care homes and supported living. A closer that fails to latch the door is one of the first things we put right on Tonbridge fire doors.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
On a typical job that means:
- Correctly powered closer to BS EN 1154
- Overhead, concealed or free-swing options
- Record of model and settings
- Assessment of door size, weight and use
Fire door law for Tonbridge properties
The rules that apply to fire doors in Tonbridge are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Tonbridge block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Tonbridge
Typical settings for fire door closers include schools, blocks of flats and HMOs. In Tonbridge, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Tonbridge
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Tonbridge
If you need a budget figure first, the guide for fire door closers is £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Tonbridge
Neighbouring towns such as Royal Tunbridge Wells, Sevenoaks, Crowborough and Maidstone are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Tonbridge?
Yes, we take on fire door closers in Tonbridge and the surrounding area, including Royal Tunbridge Wells and Sevenoaks. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.