Fire door closers for Crowborough buildings
If you need fire door closers in Crowborough, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Crowborough range from family homes after loft conversions to small blocks of flats and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
A closer that fails to latch the door is one of the first things we put right on Crowborough fire doors. We set closers in Crowborough buildings so doors close fully without becoming too heavy to open.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
Each installation includes:
- Record of model and settings
- Close-and-latch test from full open
- Adjustment of speed, latching and backcheck
- Correctly powered closer to BS EN 1154
Rules and responsibilities in Crowborough
England's framework applies in Crowborough. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Crowborough, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Crowborough need fire door closers?
Typical settings for fire door closers include HMOs, schools and blocks of flats. In Crowborough, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Crowborough
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Crowborough?
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Crowborough building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Crowborough
Neighbouring towns such as Royal Tunbridge Wells, East Grinstead, Tonbridge and Haywards Heath are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Crowborough within your coverage area?
It is. We cover Crowborough in East Sussex and neighbouring towns such as Royal Tunbridge Wells. There is no charge for the survey.
How quickly can you survey in Crowborough?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.