Fire door closers for Folkestone buildings
Our fire door closers service covers Folkestone and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Folkestone protect escape routes in houses with integral garages, HMOs and low-rise blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
A closer that fails to latch the door is one of the first things we put right on Folkestone fire doors. Free-swing closers are a practical option for Folkestone care homes and supported living.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
What you get:
- Close-and-latch test from full open
- Assessment of door size, weight and use
- Correctly powered closer to BS EN 1154
- Adjustment of speed, latching and backcheck
Which fire door rules apply in Folkestone?
Fire doors in Folkestone fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Folkestone above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Folkestone need fire door closers?
You are most likely to need fire door closers if you look after blocks of flats, care homes or HMOs. Whatever the building in Folkestone, we survey each opening and tell you which doors need work and which do not.
Our process in Folkestone
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Folkestone
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Folkestone building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Folkestone and neighbouring towns
We also cover towns near Folkestone, including Dover (11.3 km away), Ashford (Kent) and Deal. If your building is in CT20 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover CT20 and nearby postcodes?
Yes. We cover Folkestone including CT20, and nearby towns such as Dover and Ashford (Kent). The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
What is a free-swing closer?
A closer that lets the door swing freely in normal use and closes it when the fire alarm operates. It suits care settings and people who find doors heavy.