Fire door closers in Gillingham

Getting fire door closers right in Gillingham

From the ME7 postcode district outwards, we take on fire door closers across Gillingham for homes, blocks and workplaces.

In and around Gillingham, fire door work covers everything from converted period houses to schools. We plan each job around the people who use the building.

A closer that fails to latch the door is one of the first things we put right on Gillingham fire doors. We set closers in Gillingham buildings so doors close fully without becoming too heavy to open.

The most common fire door fault

A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.

On a typical job that means:

• Record of model and settings
• Assessment of door size, weight and use
• Adjustment of speed, latching and backcheck
• Correctly powered closer to BS EN 1154

The regulations behind fire doors in Gillingham

Fire doors in Gillingham fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Gillingham above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Gillingham need fire door closers?

From HMOs to blocks of flats, the requirement for fire door closers in Gillingham comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a Gillingham installation

1. Check the door, frame and existing closer
2. Select a closer suited to the leaf and use
3. Fit to the template and the door's evidence
4. Adjust closing and latching speeds
5. Test from wide and small opening angles
6. Record the closer and its settings

What does fire door closers cost in Gillingham?

If you need a budget figure first, the guide for fire door closers is £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Gillingham and neighbouring towns

Neighbouring towns such as Chatham, Rochester, Strood and Gravesend are covered too, so clients with several buildings can use one installer and one evidence format.

Questions