What fire door closers in Deal should include
Our fire door closers service covers Deal and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around Deal, family homes after loft conversions, schools and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
A closer that fails to latch the door is one of the first things we put right on Deal fire doors. We set closers in Deal buildings so doors close fully without becoming too heavy to open.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
On a typical job that means:
- Adjustment of speed, latching and backcheck
- Assessment of door size, weight and use
- Correctly powered closer to BS EN 1154
- Overhead, concealed or free-swing options
Fire door law for Deal properties
The rules that apply to fire doors in Deal are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Deal block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door closers in Deal?
Landlords, managing agents, facilities teams and homeowners in Deal can all commission fire door closers from us. The usual settings are HMOs and schools, though single doors for offices are just as welcome.
The steps on a Deal installation
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Budgeting for fire door closers in Deal
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Deal building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Deal and neighbouring towns
Neighbouring towns such as Dover, Ramsgate, Broadstairs and Margate are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Deal
Do you work in Deal?
Yes, we take on fire door closers in Deal and the surrounding area, including Dover and Ramsgate. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Deal?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.