Fire door closers for Sevenoaks buildings
From the TN13 postcode district outwards, we take on fire door closers across Sevenoaks for homes, blocks and workplaces.
Buildings in and around Sevenoaks range from houses with integral garages to care homes and small blocks of flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
A closer that fails to latch the door is one of the first things we put right on Sevenoaks fire doors. We set closers in Sevenoaks buildings so doors close fully without becoming too heavy to open.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
As standard, the work covers:
- Record of model and settings
- Overhead, concealed or free-swing options
- Close-and-latch test from full open
- Correctly powered closer to BS EN 1154
What the rules say for Sevenoaks
England's framework applies in Sevenoaks. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Sevenoaks, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs fire door closers in Sevenoaks?
The need for fire door closers usually arises in HMOs or blocks of flats, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Sevenoaks to keep escape routes protected throughout.
From enquiry to handover in Sevenoaks
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Sevenoaks?
If you need a budget figure first, the guide for fire door closers is £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Sevenoaks
Nearby towns we cover include Tonbridge, Swanley and Royal Tunbridge Wells. Distance from Sevenoaks does not change our guide prices, and the survey and quote are free.
Questions from Sevenoaks
Do you cover TN13 and nearby postcodes?
Yes. We cover Sevenoaks including TN13, and nearby towns such as Tonbridge and Swanley. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.