Fire door closers for Sittingbourne buildings
Our fire door closers service covers Sittingbourne and the wider Kent area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Sittingbourne has a broad mix of buildings, including HMOs, industrial estates and low-rise blocks of flats, and the same fire door principles apply to all of them.
Free-swing closers are a practical option for Sittingbourne care homes and supported living. A closer that fails to latch the door is one of the first things we put right on Sittingbourne fire doors.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
Each installation includes:
- Adjustment of speed, latching and backcheck
- Assessment of door size, weight and use
- Overhead, concealed or free-swing options
- Record of model and settings
Rules and responsibilities in Sittingbourne
Fire doors in Sittingbourne fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Sittingbourne above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Sittingbourne
Landlords, managing agents, facilities teams and homeowners in Sittingbourne can all commission fire door closers from us. The usual settings are schools and offices, though single doors for care homes are just as welcome.
How a Sittingbourne job runs
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Budgeting for fire door closers in Sittingbourne
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Sittingbourne building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Sittingbourne and neighbouring towns
Nearby towns we cover include Faversham, Gillingham and Chatham. Distance from Sittingbourne does not change our guide prices, and the survey and quote are free.
Questions
Is Sittingbourne within your coverage area?
It is. We cover Sittingbourne in Kent and neighbouring towns such as Faversham. There is no charge for the survey.
What happens on a survey in Sittingbourne?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do all fire doors need closers?
Most do. Exceptions include some doors kept locked shut and some doors within houses, depending on the fire strategy.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.