FD60 fire doors in Worthing, done to the evidence
When you book FD60 fire doors in Worthing, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Worthing, fire door work covers everything from purpose-built flats to schools. We plan each job around the people who use the building.
FD60 openings in Worthing buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Worthing we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Each installation includes:
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
- Certified FD60 doorset or leaf with matching evidence
- Frame fixing and structural gap sealing recorded with photos
Rules and responsibilities in Worthing
The rules that apply to fire doors in Worthing are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Worthing block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD60 fire doors fit in Worthing
Typical settings for FD60 fire doors include mixed-use commercial buildings, plant and boiler rooms and refuse stores. In Worthing, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Worthing job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Worthing
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Worthing as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Worthing
We also cover towns near Worthing, including Portslade (11.5 km away), Littlehampton and Hove. If your building is in BN11 or a neighbouring district, the service and pricing are the same.
Common questions
Is Worthing within your coverage area?
It is. We cover Worthing in West Sussex and neighbouring towns such as Portslade. There is no charge for the survey.
Can you work from an existing inspection report for my Worthing building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.