Getting fire door ironmongery right in Worthing
When you book fire door ironmongery in Worthing, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Worthing has a broad mix of buildings, including offices, converted period houses and purpose-built flats, and the same fire door principles apply to all of them.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Worthing we replace them with hardware covered by each door's evidence. Signage for fire doors in Worthing buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Bolts and selectors where specified
- Lever handles, pull handles and push plates
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
Rules and responsibilities in Worthing
Fire doors in Worthing fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Worthing above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Worthing
Typical settings for fire door ironmongery include hotels, offices and HMOs. In Worthing, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Worthing
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Worthing
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Worthing building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Worthing and neighbouring towns
Worthing is about 35.5 km from Crawley, and we cover both, along with nearby Portslade and Littlehampton. Send us your postcode and we'll confirm survey dates.
Questions
Is Worthing within your coverage area?
It is. We cover Worthing in West Sussex and neighbouring towns such as Portslade. There is no charge for the survey.
What happens on a survey in Worthing?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.