FD60 fire doors in Portslade, done to the evidence
We provide FD60 fire doors in Portslade (BN41 and the surrounding postcodes), from the first survey through to a documented handover.
Portslade has a broad mix of buildings, including family homes after loft conversions, care homes and light industrial buildings, and the same fire door principles apply to all of them.
FD60 openings in Portslade buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Portslade building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
On a typical job that means:
- Certified FD60 doorset or leaf with matching evidence
- 60-minute glazing systems where vision panels are needed
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
Which fire door rules apply in Portslade?
The rules that apply to fire doors in Portslade are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Portslade block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Portslade
You are most likely to need FD60 fire doors if you look after stair cores in taller blocks, refuse stores or plant and boiler rooms. Whatever the building in Portslade, we survey each opening and tell you which doors need work and which do not.
The steps on a Portslade installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Portslade
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Portslade and nearby
Nearby towns we cover include Hove, Brighton and Worthing. Distance from Portslade does not change our guide prices, and the survey and quote are free.
Questions
Do you cover BN41 and nearby postcodes?
Yes. We cover Portslade including BN41, and nearby towns such as Hove and Brighton. The survey and written quote are free.
What happens on a survey in Portslade?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.