FD30 fire doors in Worthing

FD30 fire doors for Worthing buildings

If you need FD30 fire doors in Worthing, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Worthing, fire door work covers everything from GP surgeries to industrial units. We plan each job around the people who use the building.

For a mixed portfolio in Worthing, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Worthing is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

Each installation includes:

• Certified FD30 or FD30S leaf, or full doorset
• Photo record, product data and certificate references at handover
• Fire-tested hinges, latch or lock and intumescent pads
• Intumescent strips and smoke seals to the certification

What the rules say for Worthing

In Worthing, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Worthing building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Who needs FD30 fire doors in Worthing?

From care homes to blocks of flats, the requirement for FD30 fire doors in Worthing comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Worthing

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Worthing

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Worthing building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Worthing

We also cover towns near Worthing, including Portslade (11.5 km away), Littlehampton and Hove. If your building is in BN11 or a neighbouring district, the service and pricing are the same.

Questions