What FD60 fire doors in Washwood Heath should include
If you need FD60 fire doors in Washwood Heath, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Washwood Heath, family homes after loft conversions, small blocks of flats and small offices all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
FD60 openings in Washwood Heath buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Washwood Heath building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
As standard, the work covers:
- Check of the fire strategy rating for each opening
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
Which fire door rules apply in Washwood Heath?
The rules that apply to fire doors in Washwood Heath are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Washwood Heath block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Washwood Heath
From stair cores in taller blocks to plant and boiler rooms, the requirement for FD60 fire doors in Washwood Heath comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Washwood Heath installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Washwood Heath?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Washwood Heath
Washwood Heath is about 5.4 km from Birmingham, and we cover both, along with nearby Aston and Acocks Green. Send us your postcode and we'll confirm survey dates.
Common questions
Do you cover B8 and nearby postcodes?
Yes. We cover Washwood Heath including B8, and nearby towns such as Aston and Birmingham. The survey and written quote are free.
Can you work from an existing inspection report for my Washwood Heath building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.