FD60 fire doors in Aldridge, WS9

FD60 fire doors in Aldridge, done to the evidence

When you book FD60 fire doors in Aldridge, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Around Aldridge, light industrial buildings, small blocks of flats and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

FD60 openings in Aldridge buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Aldridge we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• 60-minute glazing systems where vision panels are needed
• Frame fixing and structural gap sealing recorded with photos
• Check of the fire strategy rating for each opening
• Load-rated hinges and correctly powered closer

The regulations behind fire doors in Aldridge

Fire doors in Aldridge fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Aldridge above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs FD60 fire doors in Aldridge?

From plant and boiler rooms to stair cores in taller blocks, the requirement for FD60 fire doors in Aldridge comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Aldridge

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Aldridge

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Aldridge and neighbouring towns

Aldridge is about 13.8 km from Birmingham, and we cover both, along with nearby Walsall and Bloxwich. Send us your postcode and we'll confirm survey dates.

Questions from Aldridge