Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD60 fire door installation in Walsall

Heavier 60-minute doors for stair cores, plant rooms and higher-risk compartment lines. Free survey in Walsall and door-by-door pricing.

Quote in Walsall

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

FD60 fire doors for Walsall buildings

For property owners, landlords and managing agents in Walsall, we offer FD60 fire doors with one team for the survey, the product and the installation.

Walsall has a broad mix of buildings, including offices, industrial units and converted period houses, and the same fire door principles apply to all of them.

Before ordering FD60 doors for a Walsall building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Walsall we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

As standard, the work covers:

  • Intumescent and smoke seals as specified
  • Check of the fire strategy rating for each opening
  • Frame fixing and structural gap sealing recorded with photos
  • Load-rated hinges and correctly powered closer

Fire door law for Walsall properties

In Walsall, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Walsall building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Walsall

Landlords, managing agents, facilities teams and homeowners in Walsall can all commission FD60 fire doors from us. The usual settings are stair cores in taller blocks and refuse stores, though single doors for plant and boiler rooms are just as welcome.

From enquiry to handover in Walsall

  1. Confirm the 60-minute requirement against the fire strategy
  2. Survey structure, opening size and wall type
  3. Order the certified doorset with ironmongery to its evidence
  4. Install the frame, fix and seal it to the structure
  5. Hang, adjust and test the leaf, closer and latching
  6. Record evidence and make good

Guide prices in Walsall

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Walsall building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Walsall

Nearby towns we cover include Bloxwich, Wednesbury and Aldridge. Distance from Walsall does not change our guide prices, and the survey and quote are free.

Questions from Walsall

Do you cover WS1 and nearby postcodes?

Yes. We cover Walsall including WS1, and nearby towns such as Bloxwich and Wednesbury. The survey and written quote are free.

What happens on a survey in Walsall?

We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.

Do FD60 doors need smoke seals?

If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.

Are FD60 doors harder to open?

They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.

Book a free survey in Walsall

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote