Getting FD60 fire doors right in Shirley
When you book FD60 fire doors in Shirley, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Shirley range from houses with integral garages to small blocks of flats and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
FD60 openings in Shirley buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Shirley we generally fit certified doorsets, so frame and leaf share the same test evidence.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
On a typical job that means:
- Check of the fire strategy rating for each opening
- 60-minute glazing systems where vision panels are needed
- Intumescent and smoke seals as specified
- Load-rated hinges and correctly powered closer
Rules and responsibilities in Shirley
England's framework applies in Shirley. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Shirley, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Shirley need FD60 fire doors?
From mixed-use commercial buildings to plant and boiler rooms, the requirement for FD60 fire doors in Shirley comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Shirley
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Shirley
Shirley is about 9.6 km from Birmingham, and we cover both, along with nearby Solihull and Acocks Green. Send us your postcode and we'll confirm survey dates.
Questions from Shirley
Do you cover B90 and nearby postcodes?
Yes. We cover Shirley including B90, and nearby towns such as Solihull and Acocks Green. The survey and written quote are free.
What happens on a survey in Shirley?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.