FD60 fire doors for Tipton buildings
Our FD60 fire doors service in Tipton is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Tipton, family homes after loft conversions, small offices and schools all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
FD60 openings in Tipton buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Tipton we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Each installation includes:
- Certified FD60 doorset or leaf with matching evidence
- Load-rated hinges and correctly powered closer
- Check of the fire strategy rating for each opening
- Intumescent and smoke seals as specified
The regulations behind fire doors in Tipton
Fire doors in Tipton fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Tipton above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs FD60 fire doors in Tipton?
The need for FD60 fire doors usually arises in stair cores in taller blocks or mixed-use commercial buildings, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Tipton to keep escape routes protected throughout.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Tipton?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Tipton
We also cover towns near Tipton, including Dudley (3.5 km away), Wednesbury and West Bromwich. If your building is in DY4 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover DY4 and nearby postcodes?
Yes. We cover Tipton including DY4, and nearby towns such as Dudley and Wednesbury. The survey and written quote are free.
Can you work from an existing inspection report for my Tipton building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.