FD60 fire doors in Aldershot, GU11

Getting FD60 fire doors right in Aldershot

Our FD60 fire doors service covers Aldershot and the wider Hampshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Around Aldershot, schools, light industrial buildings and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Before ordering FD60 doors for a Aldershot building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Aldershot we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening

What the rules say for Aldershot

Fire doors in Aldershot fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Aldershot above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Aldershot

Typical settings for FD60 fire doors include stair cores in taller blocks, refuse stores and plant and boiler rooms. In Aldershot, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Aldershot

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Aldershot

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Aldershot as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Aldershot and nearby

Neighbouring towns such as Farnham, Farnborough, Fleet and Camberley are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions