FD60 fire doors in Eastleigh, SO50

FD60 fire doors for Eastleigh buildings

We provide FD60 fire doors in Eastleigh (SO50 and the surrounding postcodes), from the first survey through to a documented handover.

Eastleigh has a broad mix of buildings, including low-rise blocks of flats, HMOs and houses with integral garages, and the same fire door principles apply to all of them.

For FD60 work in Eastleigh we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Eastleigh buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

Each installation includes:

• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• 60-minute glazing systems where vision panels are needed

What the rules say for Eastleigh

Fire doors in Eastleigh fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Eastleigh above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Eastleigh

You are most likely to need FD60 fire doors if you look after refuse stores, mixed-use commercial buildings or stair cores in taller blocks. Whatever the building in Eastleigh, we survey each opening and tell you which doors need work and which do not.

How a Eastleigh job runs

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Eastleigh?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Eastleigh

Neighbouring towns such as Southampton, Winchester, Totton and Hythe are covered too, so clients with several buildings can use one installer and one evidence format.

Questions