FD60 fire doors in Gosport

FD60 fire doors in Gosport, done to the evidence

When you book FD60 fire doors in Gosport, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

Fire doors in Gosport protect escape routes in family homes after loft conversions, industrial estates and low-rise blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.

FD60 openings in Gosport buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Gosport we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Certified FD60 doorset or leaf with matching evidence
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening
• 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in Gosport

England's framework applies in Gosport. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Gosport, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Gosport

From mixed-use commercial buildings to plant and boiler rooms, the requirement for FD60 fire doors in Gosport comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Gosport

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Gosport

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Gosport

Neighbouring towns such as Portsmouth, Fareham, Ryde and Waterlooville are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Gosport