FD60 fire door installation in Portsmouth

FD60 fire doors for Portsmouth buildings

When you book FD60 fire doors in Portsmouth, the aim is simple: doors that close, latch and seal as tested, with records that prove it.

In and around Portsmouth, fire door work covers everything from student accommodation to care homes. We plan each job around the people who use the building.

FD60 openings in Portsmouth buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Portsmouth we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

Each installation includes:

• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Frame fixing and structural gap sealing recorded with photos
• Load-rated hinges and correctly powered closer

The regulations behind fire doors in Portsmouth

In Portsmouth, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Portsmouth building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Buildings and duty holders in Portsmouth

Typical settings for FD60 fire doors include stair cores in taller blocks, refuse stores and mixed-use commercial buildings. In Portsmouth, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

From enquiry to handover in Portsmouth

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Portsmouth?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Portsmouth and nearby

We also cover towns near Portsmouth, including Gosport (2.7 km away), Fareham and Ryde. If your building is in PO1 or a neighbouring district, the service and pricing are the same.

Common questions