FD60 fire doors in Battersea

FD60 fire doors in Battersea: what's involved

If you need FD60 fire doors in Battersea, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Battersea range from restaurants to schools and mixed-use office buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

For FD60 work in Battersea we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Battersea buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Frame fixing and structural gap sealing recorded with photos
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Check of the fire strategy rating for each opening

What the rules say for Battersea

The rules that apply to fire doors in Battersea are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a Battersea block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in Battersea?

You are most likely to need FD60 fire doors if you look after refuse stores, plant and boiler rooms or stair cores in taller blocks. Whatever the building in Battersea, we survey each opening and tell you which doors need work and which do not.

From enquiry to handover in Battersea

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Prices for FD60 fire doors in Battersea

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Battersea as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Battersea and nearby

Neighbouring towns such as Chelsea, Pimlico, City of Westminster and Fulham are covered too, so clients with several buildings can use one installer and one evidence format.

Questions