FD60 fire door installation in Chelsea

FD60 fire doors in Chelsea, done to the evidence

From the SW3 postcode district outwards, we take on FD60 fire doors across Chelsea for homes, blocks and workplaces.

Fire doors in Chelsea protect escape routes in schools, care homes and shared houses alike. We adapt the programme to the building and its occupants, never the standard of the installation.

FD60 openings in Chelsea buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Chelsea building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Load-rated hinges and correctly powered closer
• Intumescent and smoke seals as specified

What the rules say for Chelsea

England's framework applies in Chelsea. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. Enforcement of fire safety law in Chelsea sits with the London Fire Brigade.

For blocks over 11 metres in Chelsea, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Who needs FD60 fire doors in Chelsea?

Landlords, managing agents, facilities teams and homeowners in Chelsea can all commission FD60 fire doors from us. The usual settings are stair cores in taller blocks and mixed-use commercial buildings, though single doors for plant and boiler rooms are just as welcome.

From enquiry to handover in Chelsea

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Chelsea?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Around Chelsea

Neighbouring towns such as Battersea, Fulham, Pimlico and City of Westminster are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions