FD60 fire door installation in Barnet

FD60 fire doors for Barnet buildings

Looking for FD60 fire doors in Barnet? We supply and fit certified fire doors and components across Barnet and the wider Greater London area, working from a free survey and a fixed written quote.

Barnet has a broad mix of buildings, including shared houses, purpose-built blocks of flats and schools, and the same fire door principles apply to all of them.

FD60 openings in Barnet buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Barnet we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Intumescent and smoke seals as specified
• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Load-rated hinges and correctly powered closer

Rules and responsibilities in Barnet

The rules that apply to fire doors in Barnet are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a Barnet block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in Barnet?

Typical settings for FD60 fire doors include refuse stores, mixed-use commercial buildings and stair cores in taller blocks. In Barnet, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Barnet

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Barnet

Neighbouring towns such as Hadley Wood, Potters Bar, Borehamwood and Finchley are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions