FD60 fire doors: our service in Hounslow
If you need FD60 fire doors in Hounslow, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Hounslow has a broad mix of buildings, including shared houses, hotels and purpose-built blocks of flats, and the same fire door principles apply to all of them.
FD60 openings in Hounslow buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Hounslow we generally fit certified doorsets, so frame and leaf share the same test evidence.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
As standard, the work covers:
- Frame fixing and structural gap sealing recorded with photos
- Certified FD60 doorset or leaf with matching evidence
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
What the rules say for Hounslow
Fire doors in Hounslow fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. In London, the London Fire Brigade is the enforcing authority for fire safety law.
For residential buildings in Hounslow above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where FD60 fire doors fit in Hounslow
Landlords, managing agents, facilities teams and homeowners in Hounslow can all commission FD60 fire doors from us. The usual settings are stair cores in taller blocks and plant and boiler rooms, though single doors for mixed-use commercial buildings are just as welcome.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Hounslow
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Hounslow building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Hounslow and nearby
We also cover towns near Hounslow, including Isleworth (1.5 km away), Heston and Richmond. If your building is in TW3 or a neighbouring district, the service and pricing are the same.
Questions from Hounslow
Is Hounslow within your coverage area?
It is. We cover Hounslow in Greater London and neighbouring towns such as Isleworth. There is no charge for the survey.
What happens on a survey in Hounslow?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.

