FD60 fire doors in Potters Bar

FD60 fire doors for Potters Bar buildings

If you need FD60 fire doors in Potters Bar, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Potters Bar, fire door work covers everything from small offices to houses with integral garages. We plan each job around the people who use the building.

For FD60 work in Potters Bar we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Potters Bar buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Load-rated hinges and correctly powered closer
• Intumescent and smoke seals as specified
• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos

What the rules say for Potters Bar

The rules that apply to fire doors in Potters Bar are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Potters Bar block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in Potters Bar?

Typical settings for FD60 fire doors include stair cores in taller blocks, mixed-use commercial buildings and refuse stores. In Potters Bar, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Potters Bar installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Budgeting for FD60 fire doors in Potters Bar

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Potters Bar as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Potters Bar

Nearby towns we cover include Hadley Wood, Barnet and Enfield Town. Distance from Potters Bar does not change our guide prices, and the survey and quote are free.

Questions