FD60 fire doors in Richmond, TW9

FD60 fire doors in Richmond, done to the evidence

We provide FD60 fire doors in Richmond (TW9 and the surrounding postcodes), from the first survey through to a documented handover.

In and around Richmond, fire door work covers everything from care homes to converted flats. We plan each job around the people who use the building.

FD60 openings in Richmond buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Richmond building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Load-rated hinges and correctly powered closer
• 60-minute glazing systems where vision panels are needed

What the rules say for Richmond

The rules that apply to fire doors in Richmond are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Where a Richmond block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Buildings and duty holders in Richmond

The need for FD60 fire doors usually arises in stair cores in taller blocks or refuse stores, and sometimes mixed-use commercial buildings. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Richmond to keep escape routes protected throughout.

From enquiry to handover in Richmond

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Richmond?

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Richmond building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Richmond and nearby

We also cover towns near Richmond, including Isleworth (2.9 km away), Hounslow and Barnes. If your building is in TW9 or a neighbouring district, the service and pricing are the same.

Questions