FD30 fire doors in Welling

FD30 fire doors in Welling: what's involved

If you need FD30 fire doors in Welling, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Welling, fire door work covers everything from mixed-use office buildings to purpose-built blocks of flats. We plan each job around the people who use the building.

In Welling, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Welling is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Frame-to-wall gap sealed with an evidenced material
• Overhead closer set to close and latch
• Certified FD30 or FD30S leaf, or full doorset
• Fire-tested hinges, latch or lock and intumescent pads

The regulations behind fire doors in Welling

The rules that apply to fire doors in Welling are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Welling sits with the London Fire Brigade.

Where a Welling block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where FD30 fire doors fit in Welling

Landlords, managing agents, facilities teams and homeowners in Welling can all commission FD30 fire doors from us. The usual settings are care homes and schools, though single doors for shops are just as welcome.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Welling

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Welling building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Welling

Nearby towns we cover include Bexley, Eltham and Thamesmead. Distance from Welling does not change our guide prices, and the survey and quote are free.

Common questions