FD30 fire doors in Bexley

FD30 fire doors for Bexley buildings

From the DA5 postcode district outwards, we take on FD30 fire doors across Bexley for homes, blocks and workplaces.

Fire doors in Bexley protect escape routes in mixed-use office buildings, care homes and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.

In Bexley, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Bexley is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

On a typical job that means:

• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material
• Overhead closer set to close and latch
• Photo record, product data and certificate references at handover

Which fire door rules apply in Bexley?

The rules that apply to fire doors in Bexley are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Bexley sits with the London Fire Brigade.

Where a Bexley block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD30 fire doors in Bexley?

Landlords, managing agents, facilities teams and homeowners in Bexley can all commission FD30 fire doors from us. The usual settings are schools and blocks of flats, though single doors for HMOs are just as welcome.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Bexley

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Bexley and nearby

Neighbouring towns such as Welling, Dartford, Swanley and Eltham are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Bexley