FD30 fire doors in Gerrards Cross, done to the evidence
If you need FD30 fire doors in Gerrards Cross, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Gerrards Cross protect escape routes in small offices, schools and family homes after loft conversions alike. We adapt the programme to the building and its occupants, never the standard of the installation.
For a mixed portfolio in Gerrards Cross, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Gerrards Cross is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
As standard, the work covers:
- Certified FD30 or FD30S leaf, or full doorset
- Survey of the opening, frame and existing ironmongery
- Photo record, product data and certificate references at handover
- Intumescent strips and smoke seals to the certification
Rules and responsibilities in Gerrards Cross
Fire doors in Gerrards Cross fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Gerrards Cross above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Gerrards Cross need FD30 fire doors?
You are most likely to need FD30 fire doors if you look after HMOs, schools or blocks of flats. Whatever the building in Gerrards Cross, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Gerrards Cross
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Gerrards Cross
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Gerrards Cross building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Gerrards Cross and nearby
Nearby towns we cover include Chalfont St Peter, Uxbridge and Rickmansworth. Distance from Gerrards Cross does not change our guide prices, and the survey and quote are free.
Common questions
Is Gerrards Cross within your coverage area?
It is. We cover Gerrards Cross in Buckinghamshire and neighbouring towns such as Chalfont St Peter. There is no charge for the survey.
How quickly can you survey in Gerrards Cross?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.