FD30 fire doors in Coulsdon

FD30 fire doors in Coulsdon: what's involved

If you need FD30 fire doors in Coulsdon, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Coulsdon, fire door work covers everything from shared houses to purpose-built blocks of flats. We plan each job around the people who use the building.

For a mixed portfolio in Coulsdon, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Coulsdon is sized for the opening, rather than trimmed beyond what its certification allows.

Where are FD30 doors used?

FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.

The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.

On a typical job that means:

• Overhead closer set to close and latch
• Intumescent strips and smoke seals to the certification
• Fire-tested hinges, latch or lock and intumescent pads
• Certified FD30 or FD30S leaf, or full doorset

What the rules say for Coulsdon

England's framework applies in Coulsdon. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.

For blocks over 11 metres in Coulsdon, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Coulsdon

From blocks of flats to offices, the requirement for FD30 fire doors in Coulsdon comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in Coulsdon

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Coulsdon?

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Coulsdon building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Coulsdon and nearby

We also cover towns near Coulsdon, including Purley (2.7 km away), Banstead and Wallington. If your building is in CR5 or a neighbouring district, the service and pricing are the same.

Common questions