FD30 fire doors in Hampton, TW12

FD30 fire doors in Hampton, done to the evidence

Our FD30 fire doors service in Hampton is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Around Hampton, mixed-use office buildings, clinics and student accommodation all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

Each FD30 leaf we supply for Hampton is sized for the opening, rather than trimmed beyond what its certification allows. In Hampton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Fire-tested hinges, latch or lock and intumescent pads
• Intumescent strips and smoke seals to the certification
• Photo record, product data and certificate references at handover
• Certified FD30 or FD30S leaf, or full doorset

Rules and responsibilities in Hampton

England's framework applies in Hampton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.

For blocks over 11 metres in Hampton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Hampton need FD30 fire doors?

Typical settings for FD30 fire doors include shops, blocks of flats and schools. In Hampton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Hampton

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Hampton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Hampton and neighbouring towns

Neighbouring towns such as Hanworth, Sunbury-on-Thames, Walton-on-Thames and Esher are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Hampton