FD30 fire doors: our service in Barking
Looking for FD30 fire doors in Barking? We supply and fit certified fire doors and components across Barking and the wider Greater London area, working from a free survey and a fixed written quote.
Barking has a broad mix of buildings, including clinics, purpose-built blocks of flats and restaurants, and the same fire door principles apply to all of them.
In Barking, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Barking, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
On a typical job that means:
- Fire-tested hinges, latch or lock and intumescent pads
- Photo record, product data and certificate references at handover
- Overhead closer set to close and latch
- Frame-to-wall gap sealed with an evidenced material
Rules and responsibilities in Barking
England's framework applies in Barking. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors. In London, the London Fire Brigade is the enforcing authority for fire safety law.
For blocks over 11 metres in Barking, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD30 fire doors in Barking?
From shops to HMOs, the requirement for FD30 fire doors in Barking comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Barking
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Barking building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Barking and neighbouring towns
We also cover towns near Barking, including Ilford (2.8 km away), Becontree and Thamesmead. If your building is in IG11 or a neighbouring district, the service and pricing are the same.
Questions from Barking
Do you cover IG11 and nearby postcodes?
Yes. We cover Barking including IG11, and nearby towns such as Ilford and Becontree. The survey and written quote are free.
What happens on a survey in Barking?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.