FD30 fire door installation in Dagenham

What FD30 fire doors in Dagenham should include

From the RM10 postcode district outwards, we take on FD30 fire doors across Dagenham for homes, blocks and workplaces.

In and around Dagenham, fire door work covers everything from purpose-built blocks of flats to mixed-use office buildings. We plan each job around the people who use the building.

In Dagenham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Dagenham, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

• Fire-tested hinges, latch or lock and intumescent pads
• Certified FD30 or FD30S leaf, or full doorset
• Intumescent strips and smoke seals to the certification
• Frame-to-wall gap sealed with an evidenced material

Which fire door rules apply in Dagenham?

In Dagenham, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet. In London, the London Fire Brigade is the enforcing authority for fire safety law.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Dagenham building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Where FD30 fire doors fit in Dagenham

Typical settings for FD30 fire doors include shops, blocks of flats and care homes. In Dagenham, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Dagenham installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Dagenham

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Dagenham as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Dagenham

We also cover towns near Dagenham, including Becontree (2.6 km away), Romford and Hornchurch. If your building is in RM10 or a neighbouring district, the service and pricing are the same.

Questions