FD30 fire doors in Tiverton

FD30 fire doors in Tiverton, done to the evidence

Looking for FD30 fire doors in Tiverton? We supply and fit certified fire doors and components across Tiverton and the wider Devon area, working from a free survey and a fixed written quote.

Around Tiverton, small offices, family homes after loft conversions and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

In Tiverton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Tiverton is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

On a typical job that means:

• Survey of the opening, frame and existing ironmongery
• Fire-tested hinges, latch or lock and intumescent pads
• Photo record, product data and certificate references at handover
• Overhead closer set to close and latch

The regulations behind fire doors in Tiverton

England's framework applies in Tiverton. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Tiverton, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD30 fire doors fit in Tiverton

The need for FD30 fire doors usually arises in HMOs or shops, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Tiverton to keep escape routes protected throughout.

Our process in Tiverton

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Tiverton

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Tiverton building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Tiverton and neighbouring towns

Neighbouring towns such as Exeter, Heavitree, Taunton and Exmouth are covered too, so clients with several buildings can use one installer and one evidence format.

Questions