FD30 fire doors in Plymstock: what's involved
Looking for FD30 fire doors in Plymstock? We supply and fit certified fire doors and components across Plymstock and the wider Devon area, working from a free survey and a fixed written quote.
In and around Plymstock, fire door work covers everything from schools to light industrial buildings. We plan each job around the people who use the building.
Each FD30 leaf we supply for Plymstock is sized for the opening, rather than trimmed beyond what its certification allows. In Plymstock, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Intumescent strips and smoke seals to the certification
- Fire-tested hinges, latch or lock and intumescent pads
- Photo record, product data and certificate references at handover
- Survey of the opening, frame and existing ironmongery
The regulations behind fire doors in Plymstock
England's framework applies in Plymstock. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Plymstock, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where FD30 fire doors fit in Plymstock
You are most likely to need FD30 fire doors if you look after care homes, HMOs or blocks of flats. Whatever the building in Plymstock, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Plymstock
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Plymstock
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Plymstock and neighbouring towns
We also cover towns near Plymstock, including Plymouth (3.9 km away), Paignton and Newton Abbot. If your building is in PL9 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Plymstock?
Yes, we take on FD30 fire doors in Plymstock and the surrounding area, including Plymouth and Paignton. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Plymstock?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.

