FD30 fire doors for Paignton buildings
If you need FD30 fire doors in Paignton, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Paignton, fire door work covers everything from family homes after loft conversions to industrial estates. We plan each job around the people who use the building.
In Paignton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Paignton, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
Each installation includes:
- Intumescent strips and smoke seals to the certification
- Survey of the opening, frame and existing ironmongery
- Photo record, product data and certificate references at handover
- Overhead closer set to close and latch
The regulations behind fire doors in Paignton
The rules that apply to fire doors in Paignton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Paignton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Paignton need FD30 fire doors?
Typical settings for FD30 fire doors include offices, blocks of flats and shops. In Paignton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Paignton
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Paignton as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Paignton
We also cover towns near Paignton, including Torquay (4.2 km away), Newton Abbot and Exmouth. If your building is in TQ3 or a neighbouring district, the service and pricing are the same.
Common questions
Is Paignton within your coverage area?
It is. We cover Paignton in Devon and neighbouring towns such as Torquay. There is no charge for the survey.
What happens on a survey in Paignton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.