FD30 fire doors in Barnstaple, EX31

FD30 fire doors: our service in Barnstaple

For property owners, landlords and managing agents in Barnstaple, we offer FD30 fire doors with one team for the survey, the product and the installation.

In and around Barnstaple, fire door work covers everything from light industrial buildings to houses with integral garages. We plan each job around the people who use the building.

In Barnstaple, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Barnstaple is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Overhead closer set to close and latch
• Frame-to-wall gap sealed with an evidenced material
• Photo record, product data and certificate references at handover
• Certified FD30 or FD30S leaf, or full doorset

Rules and responsibilities in Barnstaple

The rules that apply to fire doors in Barnstaple are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Barnstaple block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Buildings and duty holders in Barnstaple

You are most likely to need FD30 fire doors if you look after care homes, shops or schools. Whatever the building in Barnstaple, we survey each opening and tell you which doors need work and which do not.

The steps on a Barnstaple installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Barnstaple?

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Barnstaple building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Barnstaple

Barnstaple is about 79.0 km from Plymouth, and we cover both, along with nearby Bideford and Tiverton. Send us your postcode and we'll confirm survey dates.

Questions