Getting riser and cupboard fire doors right in Tiverton
From the EX16 postcode district outwards, we take on riser and cupboard fire doors across Tiverton for homes, blocks and workplaces.
Fire doors in Tiverton protect escape routes in schools, family homes after loft conversions and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
We match riser doors in Tiverton to the rating of the riser enclosure, not to whatever was there before. While fitting riser doors in Tiverton, we photograph any gaps in fire stopping we can see and pass them on to you.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
Each installation includes:
- Seals and frame gap sealing
- Record of any fire stopping concerns found
- Single and double flush configurations
- Locks and keep-locked arrangements as specified
What the rules say for Tiverton
The rules that apply to fire doors in Tiverton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Tiverton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs riser and cupboard fire doors in Tiverton?
Landlords, managing agents, facilities teams and homeowners in Tiverton can all commission riser and cupboard fire doors from us. The usual settings are hotels and office buildings, though single doors for blocks of flats are just as welcome.
How a Tiverton job runs
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
What does riser and cupboard fire doors cost in Tiverton?
If you need a budget figure first, the guide for riser and cupboard fire doors is £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Tiverton
Neighbouring towns such as Exeter, Heavitree, Taunton and Exmouth are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Tiverton
Do you cover EX16 and nearby postcodes?
Yes. We cover Tiverton including EX16, and nearby towns such as Exeter and Heavitree. The survey and written quote are free.
What happens on a survey in Tiverton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.