What FD30 fire doors in Staveley should include
Looking for FD30 fire doors in Staveley? We supply and fit certified fire doors and components across Staveley and the wider Derbyshire area, working from a free survey and a fixed written quote.
In and around Staveley, fire door work covers everything from care homes to small offices. We plan each job around the people who use the building.
In Staveley, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Staveley, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
As standard, the work covers:
- Survey of the opening, frame and existing ironmongery
- Frame-to-wall gap sealed with an evidenced material
- Photo record, product data and certificate references at handover
- Intumescent strips and smoke seals to the certification
The regulations behind fire doors in Staveley
The rules that apply to fire doors in Staveley are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Staveley block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD30 fire doors in Staveley?
Landlords, managing agents, facilities teams and homeowners in Staveley can all commission FD30 fire doors from us. The usual settings are HMOs and blocks of flats, though single doors for offices are just as welcome.
How a Staveley job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Staveley
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Staveley as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Staveley
Staveley is about 39.2 km from Derby, and we cover both, along with nearby Chesterfield and Dronfield. Send us your postcode and we'll confirm survey dates.
Questions from Staveley
Do you cover S43 and nearby postcodes?
Yes. We cover Staveley including S43, and nearby towns such as Chesterfield and Dronfield. The survey and written quote are free.
How quickly can you survey in Staveley?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.