FD30 fire door installation in Long Eaton

FD30 fire doors for Long Eaton buildings

We provide FD30 fire doors in Long Eaton (NG10 and the surrounding postcodes), from the first survey through to a documented handover.

Long Eaton has a broad mix of buildings, including small blocks of flats, small offices and schools, and the same fire door principles apply to all of them.

Each FD30 leaf we supply for Long Eaton is sized for the opening, rather than trimmed beyond what its certification allows. In Long Eaton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

On a typical job that means:

• Photo record, product data and certificate references at handover
• Survey of the opening, frame and existing ironmongery
• Frame-to-wall gap sealed with an evidenced material
• Certified FD30 or FD30S leaf, or full doorset

The regulations behind fire doors in Long Eaton

The rules that apply to fire doors in Long Eaton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Long Eaton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Which buildings in Long Eaton need FD30 fire doors?

Typical settings for FD30 fire doors include HMOs, blocks of flats and offices. In Long Eaton, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Long Eaton installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Long Eaton

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Long Eaton and neighbouring towns

Long Eaton is about 14.0 km from Derby, and we cover both, along with nearby Ilkeston and Nottingham. Send us your postcode and we'll confirm survey dates.

Common questions