Getting fire door hold-open devices right in Staveley
If you need fire door hold-open devices in Staveley, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Staveley has a broad mix of buildings, including schools, care homes and houses with integral garages, and the same fire door principles apply to all of them.
Where doors in Staveley care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Staveley so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
As standard, the work covers:
- Assessment of door use and alarm system
- Electromagnetic holders to BS EN 1155
- Release testing with the alarm
- Hold-open and free-swing closers
Rules and responsibilities in Staveley
The rules that apply to fire doors in Staveley are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Staveley block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door hold-open devices in Staveley?
You are most likely to need fire door hold-open devices if you look after offices, communal corridors or clinics. Whatever the building in Staveley, we survey each opening and tell you which doors need work and which do not.
How a Staveley job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Staveley
As a guide, budget £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. The figure for your Staveley building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Staveley and neighbouring towns
Staveley is about 39.2 km from Derby, and we cover both, along with nearby Chesterfield and Dronfield. Send us your postcode and we'll confirm survey dates.
Questions from Staveley
Is Staveley within your coverage area?
It is. We cover Staveley in Derbyshire and neighbouring towns such as Chesterfield. There is no charge for the survey.
Can you work from an existing inspection report for my Staveley building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.