FD30 fire doors in Alfreton, done to the evidence
From the DE55 postcode district outwards, we take on FD30 fire doors across Alfreton for homes, blocks and workplaces.
In and around Alfreton, fire door work covers everything from houses with integral garages to care homes. We plan each job around the people who use the building.
Each FD30 leaf we supply for Alfreton is sized for the opening, rather than trimmed beyond what its certification allows. In Alfreton, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
On a typical job that means:
- Overhead closer set to close and latch
- Fire-tested hinges, latch or lock and intumescent pads
- Intumescent strips and smoke seals to the certification
- Survey of the opening, frame and existing ironmongery
Rules and responsibilities in Alfreton
The rules that apply to fire doors in Alfreton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Alfreton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Alfreton
Landlords, managing agents, facilities teams and homeowners in Alfreton can all commission FD30 fire doors from us. The usual settings are blocks of flats and schools, though single doors for care homes are just as welcome.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Alfreton
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Alfreton and nearby
Alfreton is about 20.4 km from Derby, and we cover both, along with nearby Ripley and Sutton in Ashfield. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Alfreton?
Yes, we take on FD30 fire doors in Alfreton and the surrounding area, including Ripley and Sutton in Ashfield. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Alfreton?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.