Getting riser and cupboard fire doors right in Long Eaton
We provide riser and cupboard fire doors in Long Eaton (NG10 and the surrounding postcodes), from the first survey through to a documented handover.
Long Eaton has a broad mix of buildings, including schools, houses with integral garages and care homes, and the same fire door principles apply to all of them.
Riser and meter cupboard doors in Long Eaton blocks are easy to overlook until an inspection flags them. We match riser doors in Long Eaton to the rating of the riser enclosure, not to whatever was there before.
Closer or lock?
Doors on stores and risers that are kept locked shut usually do not need a self-closer, as long as the strategy allows it and the door is marked accordingly. Doors that are used regularly, such as cleaner's stores, usually do. We follow the fire strategy and the risk assessment for each opening.
What you get:
- Signage as required
- Locks and keep-locked arrangements as specified
- Seals and frame gap sealing
- Fire-rated riser and cupboard doorsets
Which fire door rules apply in Long Eaton?
The rules that apply to fire doors in Long Eaton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Long Eaton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Long Eaton
Landlords, managing agents, facilities teams and homeowners in Long Eaton can all commission riser and cupboard fire doors from us. The usual settings are hotels and office buildings, though single doors for student accommodation are just as welcome.
The steps on a Long Eaton installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Long Eaton
Budget around £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. Our guide prices are the same in Long Eaton as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Long Eaton and nearby
Long Eaton is about 14.0 km from Derby, and we cover both, along with nearby Ilkeston and Nottingham. Send us your postcode and we'll confirm survey dates.
Questions from Long Eaton
Is Long Eaton within your coverage area?
It is. We cover Long Eaton in Derbyshire and neighbouring towns such as Ilkeston. There is no charge for the survey.
What happens on a survey in Long Eaton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do riser doors need closers?
Not if they are kept locked shut and the fire strategy allows it; they should then be labelled accordingly. Cupboards that are opened regularly normally need self-closers.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.