Getting FD30 fire doors right in Nottingham
When you book FD30 fire doors in Nottingham, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Nottingham, mixed-use office buildings, student accommodation and purpose-built blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In Nottingham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Nottingham is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
On a typical job that means:
- Frame-to-wall gap sealed with an evidenced material
- Overhead closer set to close and latch
- Fire-tested hinges, latch or lock and intumescent pads
- Photo record, product data and certificate references at handover
Which fire door rules apply in Nottingham?
Fire doors in Nottingham fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Nottingham above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Nottingham
You are most likely to need FD30 fire doors if you look after blocks of flats, shops or care homes. Whatever the building in Nottingham, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Nottingham
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Guide prices in Nottingham
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Nottingham as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Nottingham
Beyond Nottingham itself we also cover nearby towns such as West Bridgford (3.1 km), Arnold and Hucknall. The service, pricing and evidence are the same wherever you are.
Questions from Nottingham
Do you work in Nottingham?
Yes, we take on FD30 fire doors in Nottingham and the surrounding area, including West Bridgford and Arnold. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Nottingham?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.