Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Intumescent strips and smoke seals in Cumbria

Replacing and fitting intumescent strips, smoke seals and pads to the door's certification. Available throughout Cumbria, with a free survey and fixed written quote.

Quote for Cumbria

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Intumescent strips and smoke seals in Cumbria: what's involved

For intumescent strips and smoke seals anywhere in Cumbria, one team handles the survey, supply, installation and handover, covering Carlisle, Barrow-in-Furness, Kendal and the rest of the county.

We check that each door in your Cumbria building closes and latches against its new seals before signing it off. Seal replacement in Cumbria can be combined with any other remedials on the same inspection report.

Wherever your building is in Cumbria, the fire safety duties come from national rules, and our installation standard is the same.

Why seals fail

Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.

Which fire door rules apply in Cumbria?

England's framework applies in Cumbria. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Cumbria, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Our process in Cumbria

  1. Identify door certification and seal specification
  2. Remove failed seals and clean the grooves
  3. Fit new strips and seals to the specified positions
  4. Fit missing pads and lock linings
  5. Check the door closes and latches against the new seals
  6. Record the products fitted

Budgeting for intumescent strips and smoke seals in Cumbria

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Questions

Do you provide intumescent strips and smoke seals across Cumbria?

Yes. We cover all of Cumbria, including Carlisle and Barrow-in-Furness. Surveys and written quotes are free.

Can I just add intumescent strips to an ordinary door?

No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.

Do all fire doors need smoke seals?

Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.

Intumescent strips and smoke seals by town in Cumbria

Book a free survey in Cumbria

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote