Intumescent strips and smoke seals: our service in Workington
We provide intumescent strips and smoke seals in Workington (CA14 and the surrounding postcodes), from the first survey through to a documented handover.
Around Workington, family homes after loft conversions, light industrial buildings and small offices all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
We check that each door in your Workington building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Workington we replace them with the type and size the certification specifies.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
As standard, the work covers:
- Removal of damaged or painted seals
- Intumescent pads to hinges and locks
- Brush or blade smoke seals
- Identification of the specified seals
The regulations behind fire doors in Workington
England's framework applies in Workington. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Workington, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where intumescent strips and smoke seals fit in Workington
Typical settings for intumescent strips and smoke seals include blocks of flats, schools and HMOs. In Workington, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Workington
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Workington
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Workington building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Workington and nearby
Neighbouring towns such as Whitehaven, Dumfries, Carlisle and Kendal are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Workington
Is Workington within your coverage area?
It is. We cover Workington in Cumbria and neighbouring towns such as Whitehaven. There is no charge for the survey.
What happens on a survey in Workington?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.