What fire door frames in Sutton Coldfield should include
Our fire door frames service covers Sutton Coldfield and the wider West Midlands area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Sutton Coldfield range from care homes to industrial units and converted period houses. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Sutton Coldfield survey. Frame-to-wall gaps on Sutton Coldfield jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Hardwood or certified frames to suit the door
- Fixing at specified centres with packing
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
What the rules say for Sutton Coldfield
England's framework applies in Sutton Coldfield. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Sutton Coldfield, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Sutton Coldfield
From converted houses to older blocks of flats, the requirement for fire door frames in Sutton Coldfield comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Sutton Coldfield job runs
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Guide prices in Sutton Coldfield
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Sutton Coldfield
We also cover towns near Sutton Coldfield, including Washwood Heath (7.4 km away), Aldridge and Aston. If your building is in B75 or a neighbouring district, the service and pricing are the same.
Questions from Sutton Coldfield
Is Sutton Coldfield within your coverage area?
It is. We cover Sutton Coldfield in West Midlands and neighbouring towns such as Washwood Heath. There is no charge for the survey.
What happens on a survey in Sutton Coldfield?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.